User guide

1–Operations and Administration
Configuration and Monitoring Features
1-30 D000101-000 E
SNMP Target Parameters:
 Parameter Name
Specifies a mapping to an entry in the SNMP Target Parameters table,
determining the version of SNMP to use.
 MP Model
The Message Processing Model to be used when generating SNMP
messages for entry. Values for this field are 0 for SNMP v1, 1 for SNMP v2
and 3 for SNMP v3.
 Security Model
The Security Model to be used when generating SNMP messages using this
entry. Values for this field are 1 for SNMP v1, 2 for SNMP v2, or 3 for SNMP
v3.
 Security Name
Security name identifies the entity for whom SNMP messages will be
generated.
 Security Level
One of three options:
 NoAuthNoPriv: No Authentication, no privacy.
 AuthNoPriv: Authentication, no privacy.
 AuthPriv: Authentication and privacy
 Storage Type
NOTE:
A status of not in service indicates that the current row will not be
used in the event a trap is generated by the system. Toggling a trap to
not in service, which temporarily suspends trap forwarding, may be
useful to keep values intact.
NOTE:
Changes can only be made to rows that have a status of not in
service.
NOTE:
This is equivalent to the community string in an SNMP get.