Product specifications

6-Hyper-V Pass-Through Storage and QLogic Fibre Channel NPIV Technology
Configuration Steps
6-3
Configuration Steps
Follow these steps to present pass-through storage to two VMs on NPIV-masked
Fibre Channel storage LUNs (as shown in Figure 6-1).
1. Create two virtual NPIV ports on a single QLogic 4/8Gb Fibre Channel
adapter using the QLogic SANsurfer application.
In following illustrations, the ports are labeled as:
Virtual Port 0 at address 21-F9-00-1B-32-16-FE-EC
Virtual Port 1 at address 21-71-00-1B-32-16-FE-EC
2. Prepare four storage LUNs: two for the VMs‘ VHD files and two for the VMs‘
respective pass-through storage (see Figure 6-2).
Figure 6-2. Four LUNs Created Using the MSA’s Embedded Management
Application.