Product specifications

4-VMM2008 R2 Setup, VM Creation, and NPIV SAN Migration
VM Creation
4-6
5. Click Next until the Select Destination dialog box opens.
Ensure that the Place Virtual Machine on host button is selected (see
Figure 4-5).
Figure 4-5. Select Destination
6. Click Next.
The Select Virtual Machine Host dialogue box opens. Verify that the
Transfer type column has a SAN entry for the host you want to select.
Check the SAN Explanation tab to ensure that there are no warnings other
than for iSCSI. In this example, HostServerA is selected.