Product specifications

2-NPIV SAN Migration: Server Preparation
Installing the Software
2-8
NOTE:
In addition to enabling the Multipath I/O feature, ensure that the
storage array is added as a device within the MPIO Properties dialog
box, as shown in Figure 2-6.
Figure 2-6. MPIO Properties
4. Install the QLogic driver and SANsurfer agent on the Hyper-V hosts.
5. Install the HP VDS hardware provider on the Hyper-V host servers.
6. Install System Center VMM2008 R2 software and the VMM2008 R2
Administration Console on one of the Hyper-V host servers and the
VMM2008 R2 agent on the other Hyper-V host server.