System information

3 From the Emulex main menu:
a Select the same adapter.
b Select <1> Configure Boot Devices.
c Select the location for the Boot Entry.
d Enter the two-digit boot device.
e Enter the two-digit (HEX) starting LUN (for example, 08).
f Select the boot LUN.
g Select <1> WWPN. (Boot this device using WWPN, not DID).
h Select <x> to exit and <Y> to reboot.
4 Boot into the system BIOS and move Emulex first in the boot controller sequence.
5 Reboot and install on a SAN LUN.
Chapter 5 Using Boot from SAN with ESX Systems
VMware, Inc. 49