Product specifications

4 – Configuring the Host and VMM Servers
Configuring QLogic SANsurfer FC HBA Manager on the VMM Server
FC0054604-00 A 4-3
a
Configuring QLogic SANsurfer FC HBA Manager
on the VMM Server
This section describes how to configure the QLogic SANsurfer FC HBA Manager
GUI on the VMM server to allow QLogic FC HBAs that reside on host servers to
be managed via the VMM server. Alternately, you can use QLogic’s SANsurfer FC
HBA Command Line Interface (CLI) to achieve the tasks below.
1. Start the QLogic SANsurfer FC HBA Manager GUI on the VMM server by
either double-clicking the SANsurfer icon on the desktop or selecting
SANsurfer FC HBA Manager from the Start menu.
2. Click the Connect button in the toolbar and type the IP address or name of a
host server on which the QLogic FC HBA resides (see Figure 4-2).
Figure 4-2. SANsurfer FC HBA Manager —Connect to Host
3. Repeat Step 2 until all host servers have been connected to the SANsurfer
FC HBA Manager.