User guide

4–Real-Time Fabric Monitor
Infrastructure View Sub-Screens
IB0054607-01 A 4-15
 (cC)rit — forward/reverse switch between utilization and error categories
 (n)eighbor — displays information about the neighbor port of a link
The secondary menu selections supported for the PerformanceViewarethe
following:

(L)v —selectstheliveimage
 (rR)v —reversestep/skipsthruhistoricalimages
 F(wW)d —forwardstep/skipsthruhistoricalimages
 (b)kmrkd —selectsthecurrentbookmarkedimage
 (B)kmrk —bookmarksthecurrentimage
 (U)nbkmrk —unbookmarksthecurrentbookmarkedimage
Infrastructure View Sub-Screens
Switch Node Screens
When the user selects the Switches category from the main screen of the
Infrastructure Section View Screen discussed in “Submenu Segment” on page 4-6
above, screens are displayed to enable the user to drill-down to a specific switch
of interest. The order in which these screens are displayed will depend upon the
number of switches found within the fabric.
Switch Node Selection Screen (500+ Switch Nodes)
If there are 500 or more switch nodes found within the fabric, Figure 4-30 is an
example of the screen that will be displayed first.
NOTE:
A Switch Node represents a single Switch Chip within the fabric. Large
switches, such as the QLogic12000 or SilverStorm 9240 are composed of
many Switch Chips and will be displayed as multiple Switch Nodes within
the screens which follow.