User guide

2–FastFabric TUI Menu
Fabric Monitoring
IB0054607-01 A 2-29
For detail levels 2-4, the additional information is only gathered on the node running
the captureall command. The information is gathered for every fabric specified in
the
/etc/sysconfig/iba/ports file.
Run a command on all hosts
(Linux) This will run the cmdall command. A Linux shell command (or sequence
of commands separated by semicolons) may be specified to be executed against
all selected hosts.
View iba_host_admin result files
(All) This permits viewing of the test.log and test.res files which reflect the
results from
iba_host_admin runs (such as those for installing InfiniBand
software or rebooting all hosts per menu items above). The user is also given the
option to remove these files after viewing them.
If not removed, subsequent runs of
iba_chassis_admin, iba_host_admin or
iba_switch_admin from within the current directory will continue to append to
these files.
Fabric Monitoring
This menu is focused on monitoring the performance of the fabric. Pressing the
key corresponding to menu item (0) will toggle the Skip/Perform selection for the
given item. More than one item may be selected. Once the desired set of items
have been selected, enter P. To unselect all items, enter N. Entering X or pressing
ESC will exit this menu and return to the Main Menu.
Selecting
5 from the Fast Fabric InfiniBand Tools menu (Figure 2-3), displays
the Fast Fabric IB Fabric Monitoring Menu (Figure 2-8)
Figure 2-8. Fast Fabric IB Fabric Monitoring Menu
Menu Items Description
Selecting item 0 will change the item from skip to perform. Selecting N will
unselect all items and X will exit the menu system. The item is described below.
Fast Fabric IB Fabric Monitoring Menu
0) Fabric Performance Monitoring [Perform]
P) Perform the selected actions N) Select None
X) Return to Previous Menu (or ESC)