User guide

2–FastFabric TUI Menu
Fast Fabric IB Host Setup
IB0054607-01 A 2-19
Fast Fabric IB Host Setup
This menu is focused on initial host setup and installation of InfiniBand software
on all the hosts. Pressing the keys corresponding to menu items (0-9, a-d) will
toggle the Skip/Perform selection for the given item. More than one item may be
selected. Once the desired set of items have been selected, enter P. To unselect
all items, enter N. Entering X or pressing ESC will exit this menu and return to the
Main Menu.
Selecting
3 from the Fast Fabric InfiniBand Tools menu (Figure 2-3), displays
the Fast Fabric IB Host Setup Menu (Figure 2-6)
Figure 2-6. Fast Fabric IB Host Setup Menu
Menu Items Description
Selecting items 0 through 9 and a through d will change the item from skip to
perform. Selecting N will unselect all items and X will exit the menu system. The
items are described below.
Fast Fabric IB Host Setup Menu
Host List: /etc/sysconfig/iba/hosts
Setup:
0) Edit Config and Select/Edit Hosts Files [ Skip ]
1) Verify Hosts via Ethernet ping [ Skip ]
2) Setup Password-less ssh/scp [ Skip ]
3) Copy /etc/hosts to all hosts [ Skip ]
4) Show uname -a for all hosts [ Skip ]
5) Install/Upgrade QLogic IB Software [ Skip ]
6) Configure IPoIB IP Address [ Skip ]
7) Build MPI Test Apps and Copy to Hosts [ Skip ]
8) Reboot Hosts [ Skip ]
Admin:
9) Refresh ssh Known Hosts [ Skip ]
a) Rebuild MPI Library and Tools [ Skip ]
b) Run a command on all hosts [ Skip ]
c) Copy a file to all hosts [ Skip ]
Review:
d) View iba_host_admin result files [ Skip ]
P) Perform the selected actions N) Select None
X) Return to Previous Menu (or ESC)