User guide
2–FastFabric TUI Menu
Fast Fabric InfiniBand Externally Managed Switch Setup/Admin Menu
IB0054607-01 A 2-13
enableall - Enables Fabric Manager start on master and any slave MMs in
selected chassis upon boot/reboot.
disable - Disables Fabric Manager start on master and any slave MMs in
selected chassis upon boot/reboot.
Additional options prompted for:
parallel vs serial operation
prompting for chassis password (default is to have password in
fastfabric.conf or to use password-less ssh)
If any chassis fails the operation, use the View iba_chassis_admin result files
option to review the result files from the update. Refer to QLogic FastFabric
Command Line Interface Reference Guide for more details.
Generate all Chassis Problem Report Information
(Switch) This will run the captureall -C command to collect configuration and
status information from all selected chassis and generate a single
*.tgz file that
can be sent to the Support Representative.
Run a command on all chassis
(Switch) This will run the cmdall -C command. A Chassis CLI command may be
specified to be executed against all selected chassis.
View iba_chassis_admin results files
(All) This permits viewing of the test.log and test.res files which reflect the
results from
iba_chassis_admin runs (such as for updating Chassis Firmware or
rebooting all chassis per menu items above). The user is also given the option to
remove these files after viewing them.
If not removed, subsequent runs of
iba_chassis_admin, iba_host_admin or
iba_switch_admin from within the current directory will continue to append to
these files.
Fast Fabric InfiniBand Externally Managed
Switch Setup/Admin Menu
This menu is focused on administration of QLogic 12200 and SilverStorm 9024FC
externally managed switches. Pressing the keys corresponding to menu items
(0-8) will toggle the Skip/Perform selection for the given item. More than one item
may be selected. Once the desired set of items have been selected, enter P. To
unselect all items, enter N. Entering X or pressing ESC will exit this menu and
return to the Main Menu.
Selecting
2 from the Fast Fabric InfiniBand Tools menu (Figure 2-3), displays
the Fast Fabric IB Externally Managed Switch Setup/Admin Menu (Figure 2-5)