User guide

2–FastFabric TUI Menu
Fast Fabric IB Chassis Setup/Admin Menu
2-10 IB0054607-01 A
Configure Chassis Fabric Manager
(Switch) The Configure Chassis Fabric Manager selection will assist in
configuring the Fabric Manager for any QLogic 12000 chassis with appropriate
license keys. This operation will be skipped for other chassis models.
Prompts will first guide the user through selection or generation of a
qlogic_fm.xml file. When generate is selected, the config_generate
command is used to guide the user through selecting Fabric Manager
configuration options. See the QLogic Fabric Manager User Guide for more
information about
config_generate.
Prompts will guide the user through selecting the config update options:

run - Ensures given Fabric Manager configuration is on the chassis and
running. As needed push Fabric Manager configuration to each chassis. It
will unconditionally restart the Fabric Manager on master Management
Modules (MM), it will make sure it is not running on slave MMs.

runall - Ensures given Fabric Manager configuration is on the chassis and
running. As needed push Fabric Manager configuration to each chassis. It
will unconditionally restart the FM on master and slave MMs

push - Ensures given Fabric Manager configuration is on the chassis. As
needed push Fabric Manager configuration to each chassis.
Prompts will also guide the user through selecting the Fabric Manager autostart
options:

enable - Enables Fabric Manager start on master MM upon chassis
boot/reboot, disabled Fabric Manager autostart on any slave MMs in
selected chassis.

enableall - Enables Fabric Manager start on master and any slave MMs in
selected chassis upon boot/reboot.

disable - Disables Fabric Manager start on master and any slave MMs in
selected chassis upon boot/reboot.
Additional options prompted for:
 parallel vs serial update
 prompting for chassis password (default is to have password in
fastfabric.conf or to use password-less ssh)
If any chassis fails to be updated, use the
View iba_chassis_admin result files
option to review the result files from the update. Refer to FastFabric Command
Line Interface Reference Guide for more details.