User guide

2–FastFabric TUI Menu
QLogic InfiniBand Software Main Menu
IB0054607-01 A 2-3
QLogic InfiniBand Software Main Menu
The QLogic InfiniBand Software main menu is the top level menu for the QLogic
InfiniBand Software. It can be activated using the
iba_config command. This
menu is not part of the FastFabric TUI. However, since it is one way of getting to
the FastFabric Main Menu it will be summarized here. Figure 2-2 is a example of
the QLogic Infiniband Software main menu.
Figure 2-2. QLogic InfiniBand Software Main Menu (Example)
Menu Items Description
Selecting items 1 through 7 will display the given submenu. Selecting X will exit
the menu system. The submenus are described below.
Show Installed Software
Menu item 1) Show Installed Software when selected displays the QLogic Inc.
IB Installed Software list and shows what is
Installed and Not Installed.
Reconfigure OFED IP over IB
Menu item 2) Reconfigure OFED IP over IB when selected proceeds through
the reconfiguration of the OFED IP over IB configuration.
Reconfigure Driver Autostart
Menu item 3) Reconfigure Driver Autostart when selected proceeds through
the reconfiguring of the drivers autostart configuration.
Update HCA Firmware
Menu item 4) Update HCA Firmware when selected proceeds through the
updating the HCA Firmware.
QLogic Inc. InfiniBand VERSION Software
1) Show Installed Software
2) Reconfigure OFED IP over IB
3) Reconfigure Driver Autostart
4) Update HCA Firmware
5) Generate Supporting Information for Problem Report
6) Fast Fabric (Host/Chassis/Switch Setup/Admin)
7) Uninstall Software
X) Exit