User guide

ManualsBrandsQlogic ManualsComputer equipmentFast Fabric

121

122

123

124

125

126

127

128

129

130

A–FastFabric Configuration Files

FastFabric Configuration File

A-4 IB0054607-01 A

# $1 = hostname provided (could be ethernet or IPoIB name)

echo "$1"|sed -e "s/$FF_IPOIB_SUFFIX\$//"

# comment out line above and uncomment line below if using prefixes

#echo "$1"|sed -e "s/^$FF_IPOIB_PREFIX//"

}

# IP netmask for IPoIB subnet [-m option]

# if "" default will be determined based on class of IP address [A, B, C]

export FF_IPOIB_NETMASK=${FF_IPOIB_NETMASK:-}

# Maximum parallel processes for ibtest and -p option on other commands

# set to 1 to avoid parallel execution

export FF_MAX_PARALLEL=${FF_MAX_PARALLEL:-20}

# If the systems are slow for some reason, this can be used to provide a

# multiplier for all timeouts in ibtest, iba_host_admin, iba_chassis_admin,

# iba_switch_admin

export FF_TIMEOUT_MULT=${FF_TIMEOUT_MULT:-2}

# where to put result files from FastFabric runs of

# ibtest, iba_host_admin, iba_chassis_admin, iba_switch_admin

#export FF_RESULT_DIR=${FF_RESULT_DIR:-.}

export FF_RESULT_DIR=${FF_RESULT_DIR:-$HOME}

# QLogic IB product to install during iba_host_admin load and upgrade

export FF_PRODUCT=${FF_PRODUCT:-QLogicIB-Basic.`cat /etc/sysconfig/iba/osid_wrapper`}

# QLogic IB product version to install during iba_host_admin load and upgrade

export FF_PRODUCT_VERSION=${FF_PRODUCT_VERSION:-`cat /etc/sysconfig/iba/version_wrapper

2>/dev/null`}

# QLogic IB packages to install during iba_host_admin load [-P option]

#export FF_PACKAGES=${FF_PACKAGES:-iba ipoib verbs_mpi}

#export FF_PACKAGES=${FF_PACKAGES:-iba ipoib psm_mpi}

export FF_PACKAGES=${FF_PACKAGES:-iba ipoib mpi}

# Additional INSTALL options during iba_host_admin load [-I option]

#export FF_INSTALL_OPTIONS=${FF_INSTALL_OPTIONS:- -D iba_mon -D s20tune -E qlogic_sa}

export FF_INSTALL_OPTIONS=${FF_INSTALL_OPTIONS:- -D iba_mon -D s20tune}

# Additional INSTALL options during iba_host_admin upgrade [-U option]

#export FF_UPGRADE_OPTIONS=${FF_UPGRADE_OPTIONS:- -D iba_mon -D s20tune -E qlogic_sa}

export FF_UPGRADE_OPTIONS=${FF_UPGRADE_OPTIONS:- -D iba_mon -D s20tune}

# where to upload server specific files to during uploadall, captureall

# [-d option]

export UPLOADS_DIR=${UPLOADS_DIR:-./uploads}

# where to download server specific files from during downloadall

# [-d option]

export DOWNLOADS_DIR=${DOWNLOADS_DIR:-./downloads}

# where to save history and baselines for cluster analysis and health checks

# [-d option]

export FF_ANALYSIS_DIR=${FF_ANALYSIS_DIR:-/var/opt/iba/analysis}

# topology input file(s) to use for fabric_analysis, all_analysis and

# iba_reports operations. The %P marker will be replaced with the