User guide

4–Real-Time Fabric Monitor
Fabric View Sub-Screens
IB0054607-01 A 4-41
Link End-Node Information Selection Screen
Figure 4-55 is an example of the screen for selecting the information to display for
an end-node of a specific link within the fabric
Figure 4-55. Link End-Node Information Selection Screen
Selections on this screen will display Device Information screen described in “CA
Device Information Screen” on page 4-29 or Port Information Selection screen
described in “CA Port Information Selection Screen” on page 4-31.
NOTE:
In the present release only the Device Info and Ports Info Categories are
implemented.
MENU: (H)ome, (I)nfrastructureView, (F)abricView, (P)erformanceView,
(T)opContext, (A)dmin, (Q)uit
VIEW: [F]:H:F:All:Link1:Node1Info
CONTEXT: Name: End-Node 1 Info, Total links: 111
FABRIC: Top: [Tue Feb 2 07:31:25 2010, Hist], Now: Tue Feb 2 07:51:50 2010
SWs: 11, HCAs: 3, TCAs: 0, Nodes: 14, SMs: 1
Links: 48, SWsPorts: 103, HCAsPorts: 4, TCAsPorts: 0
HlthErrs: Not Avail, CommErrs: 0, Alrms: Not Avail
LINK: LnkNo: 1, LnkTyp: External,
EndNode1: 0x00066a0098007b70, PortNo: 1, NodeDesc: stewie HCA-1
EndNode2: 0x00066a00d9000479, PortNo: 18, NodeDesc: i9k479
LinkWidth: Active: 4x, Supported: 1-4x, Enabled: 1-4x,
LnkSpd: Active: 5.0Gb, Supported: 2.5-5Gb, Enabled: 2.5-5Gb
CID NODE INFORMATION
1 Device Info
2 Ports Info
3 Chassis Info
4 Module Info
5 Partition Info
6 Health Info
SUBMENU: (p)rvPg, Fr(Z), Unfr(z)