Product specifications

5 – Detailed Descriptions of Command LineTools
D000006-000 Rev A 5-83
Q
5.6.5.1
Host SM items checked against the baseline
❥ SM configuration file
❥ The version of the SM rpm installed on the system
5.6.5.2
Host SM items also checked during healthcheck
- The SM is in the running state
5.6.6
esm_analysis
(Switch): The esm_analysis command has the following usage:
esm_analysis [-b|-e] [-s] [-d dir] [-G esmchassisfile] [-E
'esmchassis']
-b - baseline mode. The default is the compare/check mode.
-e - evaluate health only. The default is the compare/check mode.
-s - save history of failures (i.e., errors/differences).
-d dir - the top level directory for saving baseline and history of failed checks.
The default is /var/opt/iba/analysis.
-G esmchassisfile - the file with SM chassis within the cluster. The default
is /etc/sysconfig/iba/esm_chassis.
-E esmchassis - the list of the SM chassis to be analyzed.
for example:
esm_analysis
The embedded SM analysis tool checks the following:
❥ embedded SM configuration (as reported by the chassis commands specified
in FF_ESM_CMDS in fastfabric.conf).
❥ embedded SM health (as reported by smControl status).
Environment Variables
The following environment variables are also used by this command:
ESM_CHASSIS, ESM_CHASSIS_FILE - see the discussion on the selection
of chassis above. These have the same format as CHASSIS and
CHASSIS_FILE.
FF_TIMEOUT_MULT - a multiplier for response timeouts. The default is 2.
This typically does not need to be set, but in the event of unexpected timeouts