Product specifications

5 – Detailed Descriptions of Command LineTools
D000006-000 Rev A 5-81
Q
❥ changes to SNMP persistent configuration within the chassis
The following Chassis items will not be checked against baseline:
❥ changes to the chassis configuration on the management LAN (e.g.,
showChassisIpAddr, showDefaultRoute). Such changes will typically
result in the chassis not responding on the LAN at the expected address that
is detected by failures that will perform other chassis checks.
5.6.4.2
Chassis Items also checked during healthcheck
Based upon hwCheck:
❥ Overall health of FRUs in chassis:
❑ Status of Fans in chassis
❑ Status of Power Supplies in chassis
❑ Temp/Voltage for each card
❥ Presence of adequate power/cooling of FRUs
❥ Presence of N+1 power/cooling of FRUs
❥ Presence of Redundant AC input
5.6.5
hostsm_analysis
(All): The hostsm_analysis command has the following usage:
hostsm_analysis [-b|-e] [-s] [-d dir]
-b - baseline mode. The default is the compare/check mode.
-e - evaluate health only. The default is the compare/check mode.
-s - save history of failures (i.e., errors/differences).
-d dir - the top level directory for saving baseline and history of failed
checks. The default is /var/opt/iba/analysis.
for example:
hostsm_analysis
The host SM analysis tool checks the following:
❥ host SM software version
❥ host SM configuration file (simple text compare via FF_DIFF_CMD)
❥ host SM health (i.e., is it running?)