User Manual

83822-580-00 Rev. D 09/13 3
DATA SHEET
Host Bus Interface Specifications
Bus Interface
PCI Express
®
Gen2 x8
Host Interrupts
INTx, MSI, and MSI-X
I/O Virtualization (VMflex™)
NIC partitioning (NPAR)
Compliance
PCI Express Base Specification, rev. 2.0, PCI Bus
Power Management Interface specification, rev. 1.2
Ethernet Specifications
Throughput
10Gbps full-duplex line rate per port
Ethernet Frame
1500 byte or 9600 byte (jumbo frame)
Stateless Offload
IP, TCP, and UDP checksum offloads
Large and giant send offload (LSO, GSO)
Large receive offload (LRO)
Receive side scaling (RSS)
Interrupt coalescing
VMware
®
NetQueue
Microsoft
®
VMQ
Baseboard Management Controller (BMC) Support
SMBus
RMII (NC-SI)
Wake on LAN
Supported, including magic packet recognition
Compliance
IEEE: 802.3ae (10Gb Ethernet), 802.1q (VLAN),
802.3ad
1
(Link Aggregation), 802.1p (Priority
Encoding), 802.3x (Flow Control), IPv4 (RFQ 791), IPv6
(RFC 2460), 802.1Qbb (Priority-Based Flow Control),
802.1Qaz (Enhanced Transmission Selection)
1 Contact your QLogic sales representative regarding supported
configurations.
FCoE Specifications
Logins
Support for 2,048 concurrent logins and 2,048 active
exchanges
Port Virtualization
N_Port ID virtualization (NPIV)
Compliance
SCSI-3 Fibre Channel Protocol (SCSI-FCP), Fibre
Channel Tape (FC-TAPE) Profile, SCSI Fibre Channel
Protocol-2 (FCP-2), Second Generation FC Generic
Services (FC-GS-2), Third Generation FC Generic
Services (FC-GS-3), FCoE & FIP (FC-BB-5)
iSCSI Specifications
Compliance
RFC 3720 (iSCSI), RFC 3347 (iSCSI Requirements and
Design Considerations), CHAP, iSNS, SLP
Tools and Utilities (EP8214 excluded)
Management Tools and Device Utilities
QConvergeConsole: a unified management tool
(GUI and CLI) for Fibre Channel/FCoE, iSCSI, and
networking
Native OS management tools for networking
Boot Support
PXE, FCoE, and iSCSI boot
APIs
SNIA HBA API V2, SMI-S
Operating Systems
Microsoft Windows Server
®
, Red Hat
®
Linux
®
, Novell
®
SLES
®
, VMware ESX
®
/ESXi, Citrix
®
XenServer
®
Controller Specifications
Typical Port Configurations
Four 1GbE ports (two 1GbE ports for cLOM8214-RJ)
Two 10GbE ports
Two 10GbE ports + two 1GbE ports
Memory
Integrated 1MB SRAM
16-bit ECC-protected DDR3 interface to external
DRAM
Input Voltages
cLOM8214, EP8214: 0.96V core, 2.5V I/O, 1.5V DDR3
cLOM8214-KR: 0.96V, 1.2V core; 1.8V, 2.5V I/O; 1.5V
DDR3
cLOM8214-RJ: 0.8V, 0.96V core; 1.2V, 2.5V I/O, 1.5V
DDR3
Temperature
Operating: 100°C maximum junction temperature
Storage: –65°C to 150°C
Airflow
System-design dependent
Packaging
cLOM8214, EP8214: 27mm x 27mm, 672 ball
cLOM8214-KR: 29mm x 29mm, 783 ball
cLOM8214-RJ: 31mm x 31mm, 900 ball
Ball pitch: 1.0mm
Ordering Information
cLOM8214
LOM device with XAUI interface
Ships with minimum order of 160 devices (40 devices
per tray x 4 trays); increments in multiples of 40
cLOM8214-KR
LOM device with integrated 10GBase-KR/SFI PHY
Ships with minimum order of 144 devices (36 devices
per tray x 4 trays); increments in multiples of 36
cLOM8214-RJ
LOM device with integrated 10GBase-T PHY
Ships with minimum order of 108 devices (27 devices
per tray x 4 trays); increments in multiples of 27
EP8214
Embedded controller for storage target applications
Ships with minimum order of 160 devices (40 devices
per tray x 4 trays); increments in multiples of 40