Datasheet

5–Software Installation

Install QLogicIB-Basic with the Installer Tool

5-12 IB0056101-00 H

The Installer can also be used as a Command Line Interface (CLI). There are

numerous options for installation/upgrade/uninstallation/autostart of all the

available components. Here are the available options:

./INSTALL [-r root] [-v|-vv] [-a|-n|-U|-F|-u|-s|-i comp|-e comp|-E

comp|-D comp] [-f] [--user_configure_options ’options’]

./INSTALL -C lists all the available components, which include:

The following additional component names are allowed for -E and -D options:

ib_stack opensm ofed_debug

mvapich_pgi_qlc truescale

mvapich_pathscale_qlc oftools

mvapich_intel_qlc ib_stack_dev

openmpi_gcc_qlc fastfabric

openmpi_pgi_qlc qlgc_srp

openmpi_pathscale_qlc qlgc_vnic

openmpi_intel_qlc ofed_ipoib

ofed_mpisrc ofed_sdp

ofed_rds ofed_udapl

ofed_srp qlgc_fm

ofed_srpt mvapich

ofed_iser mvapich2

ofed_isert openmpi

ofed_iwarp mvapich_gcc_qlc

iba_mon qlgc_fm_snmp

NOTE:

The component names are not the same as the RPM names in the RPM

downloads, even though they are RPM-based in most cases. See “Package

Descriptions” on page D-1 for more information.