User`s guide

File Systems

• CEE information and statistics query

• Flash configuration

• Collect and reset fcport statistics

• Configure LUN masking

• Configure QoS and collect statistics

• Support for obtaining SFP information

• Support for FC-transport based Asynchronous Event Notification

• Support for I/O profiling

• Collect or reset fabric statistics

• Configure and query flash boot partition

• Configure trunking on Brocade adapter ports

• store driver configuration in flash memory

• Brocade-1860 Fabric Adapter 16Gbs support and flash controller fixes

• Brocade-1860 Fabric Adapter Hardware enablement

• Brocade-1860 Fabric Adapter vHBA support

• Initiator-based LUN masking

(3.1)

• Emulex Blade Engine 2 10Gbps adapter driver (be2net): Add support for multiple Tx queues. (3.1)

• Emulex FC/FCoE driver (lpfc): Add FCF priority failover functionality. (3.1)

• Intel PRO/1000 PCI-Express Gigabit network adapter driver (e1000e): Add Jumbo Frame support for

the 82583 Gigabit Ethernet Controller. (3.1)

• QLogic 1/10 GbE Converged/Intelligent Ethernet Adapter driver (qlcnic): Add multi-protocol internal

loopback support. Driver can now generate loopback traffic, conduct tests, and return the results to an

application. (3.1)

• coretemp: Add core and package threshold support. The thresholds are configured using the

tempX_max and tempX_max_hyst interfaces in sysfs. An interrupt is generated if the CPU

temperature reaches or crosses above tempX_max or if it drops below tempX_max_hyst. To allow the

hysteresis mechanism to work, the value of tempX_max should be configured to be several degrees

higher than the value of tempX_max_hyst. (3.1)

A.7 File Systems

btrfs

• Add a DCACHE_NEED_LOOKUP flag to d_flags to improve the performance of ls and readdir().

(3.1)