Operation Manual

41
SPECIFICATIONS
Max.Wattage: 13 kW
Min. Wattage: 5 kW
Gas Consumption: 450 g/hr-945 g/hr
Height: 224 cm including stand
Model PGU2013
Gas type propane, butane or LPG only
Countries of des-
tination (*)
BE-ES-FR-GB-GR-
IT-PT-LUX
NL-NO-DK-FIN-SE
Gas Category I3+ (28-30/37) I3 B/P (30)
Pressure (mBar) 28-30/37 28-30
(*) This appliance is not suitable for Germany, Austria, Swiss
ASSEMBLY (picture 2)
Required tools
• Open end wrench 10 & 13 mm
• Adjustable opening wrench (2) 20 cm (8’’) long
• Slip joint pliers 23 cm (9’’) long
• Philips screwdriver w/ medium blade
• PIumbing tape for joints
• Spray bottle of soap solution for leakage test
Parts supplied
• Stand (1) with tank housing (8)
• Assembly post (7) with 3 pcs post brackets
• Gas connector suitable for:
- Ø 8-12 mm hose (Hose connector as separate item in the box)
- G1/2 fitted as standard
• Note: Hose and regulator not included
• Reflector 820 mm consisting out of 4 pieces with:
- 9 pcs washers Ø 8 mm
- 9 pcs M6*10mm bolts
- 9 pcs M8 cap nuts
• 3 pcs 60 mm pins for reflector support
• 4 pcs bolts M6 X 10 mm for assembly post and burner
• 6 pcs bolts & nuts M6 X 35 mm for post and post brackets
• 3 pcs bolts M8 X 16 mm for post brackets and stand
• Bracket with 2 wheels including:
- 2 bolts M8*20
- 2 nuts M8
Step 1: picture 3
• Put the 3 pcs post brackets (9) on each position on the base (10) as shown in
picture 2.
• Use 3 pcs M8 x 16 mm bolts to join the post brackets (9) and base (10).
Step 2: picture 4
• Put the post (7) on the top of 3 pcs post brackets (9).
4
man_PGU2013_('18)_V1.indd 41 10-01-18 14:56