Operation Manual

OPERATION

1. Plug in the power plug.

2. Turn on the heater with power switch button. “HEAT” light on, buzzer

sounds every time when pressing.

Operation by Control Panel

• Press ON/OFF button, heating mode starts. “HEAT” light on;

• Press ON/OFF button again, heating & lighting are both on;

• Press ON/OFF button the 3rd time, only lighting is on.

• Press ON/OFF button the 4th time, all functions are stop and heater in stand-

by mode, with “HEAT” light blinking.

Circulation: Heating ; Heating + Lighting ; Lighting ; Stand-by

ON/OFF

HEAT

Power Switch

Heat Indicator

ON/OFF Button

Remote Control

Receiver

Operation by Remote Control

• Press “HEAT” button, heating mode starts. “HEAT” light

on;

• Press “HEAT” button again, heating mode stops, heater

back to stand-by mode.

• Press “LIGHT” button, light on.

• Press “LIGHT” button again, light off. Return to Stand-by

mode.

• Press “OFF” button, all functions stop and return to Stand-

by mode.

Remark

“HEAT” Indicator:

• Blink - Stand-by Mode

• Keep lighting on - Heating Mode

• Turn off - Lighting Mode only / Power off

OFF

LIGHTHEAT