Operation Manual

• During operation and just after operation

the appliance will be extremely hot. NEVER

touch it during operation or just operation.

NEVER move the appliance during this

time.

• Switch off the appliance when it is

unattended.

• Do not cover or obstruct the heater when

in use.

• Disconnect from mains during installation,

cleaning and/or lamp replacement and

ensure the lamp is cool.

If you fail to consult and/or follow up the

rules, instructions and explanation, the

warranty will no longer be valid, and the

manufacturer will no longer deal with

any damage to the appliance and/or your

environment under the warranty.

ASSEMBLING THE HEATER

• The manufacturer is not responsible for any harm or damage if attention is

not paid to the points described above.

• The use of this product and the elements required for that purpose is entirely

at the end user’s own risk.

• The heating lights can be vulnerable. Make sure to handle the appliance with

care. Avoid vibrations.

• Never immerse in water/liquids. Risk of death

INSTALLATION

Make sure to mount the appliance only on a firm and sturdy underground. In

case of doubt have underground checked by an expert.

WARNING - this appliance must be connected to an earthed power socket.

The heater is fitted with a supply cable and molded plug, therefore the ter-

minals should not be interfered with. The following points should be consi-

dered when positioning the heater:

• Install the appliance and keep the distances as in the drawing. All distances

are in mm.