Operation Manual

25
4
• Only use the device for its intended
purpose. Other usage may lead to short
circuits, burns, electroshocks, lamp
explosion, crash, etc.
• Install the heater only if it complies with
local regulations, laws and standards;
• Make sure that the available voltage
does not exceed the voltage stated in the
specifications of this manual.
• Check if the voltage indicated on the
type plate corresponds to the local mains
voltage before you connect the appliance.
• The appliance is suitable for mains voltages
ranging from 220-240V~, 50/60 Hz.
• Always make sure that you actually see the
appliance when you want to switch it on.
Never use things like a timer, programmer
or any other device (including Internet
apps) that switches on the appliance
automatically as this may cause fire!
• Use the appliance according to the
instructions as described in this manual.
• Install the heater according to the
instructions as described in the installation
section of the directions for use;
• This heater is manufactured according to
CE safety standards. Nevertheless, as with
any other heating device, care must be
taken;
• RISK OF FIRE Never use the heater in
places where inflammable and/or harmful
Gases, products or fumes may be present
(e.g. exhaust Gases, paint fumes, curtains,
paper, clothes);
• If the heater is positioned too close to
inflammable materials you may risk fire;