Operation Manual

the appliance will be extremely hot. NEVER

touch it during operation or just operati-

on. NEVER move the appliance during this

time.

• Switch off the appliance when it is unat-

tended.

• Do not cover or obstruct the heater when

in use.

• Disconnect from mains during installati-

on, cleaning and/or lamp replacement and

ensure the lamp is cool.

If you fail to consult and/or follow up the

rules, instructions and explanation, the

warranty will no longer be valid, and the

manufacturer will no longer deal with any

damage to the appliance and/or your envi-

ronment under the warranty.

ASSEMBLING THE HEATER

• The manufacturer is not responsible for any harm or damage if attention is

not paid to the points described above.

• The use of this product and the elements required for that purpose is entirely

at the end user’s own risk.

• The heating lights can be vulnerable. Make sure to handle the appliance with

care. Avoid vibrations.

• Never immerse in water/liquids. Risk of death

INSTALLATION

Make sure to mount the appliance only on a firm and sturdy underground. In

case of doubt have underground checked by an expert.

WARNING - this appliance must be connected to an earthed power socket.

• The heater is fitted with a supply cable and molded plug, therefore the ter-

minals should not be interfered with. The following points should be consi-

dered when positioning the heater:

• Please observe the minimum safe distance between the heater body and any

inflammable surfaces. (See Fig 5).