User Manual

38
4
Always store the gas containers in a cool,
dry and dark place.
• Always use a suitable and approved 700
mbar medium-pressure regulator. In case
of any doubt contact your local dealer.
ASSEMBLING THE HEATER
The manufacturer is not responsible for any harm or damage if attention is not
paid to the points described above.
The use of this product and the elements required for that purpose is entirely at
the end user’s own risk.
GFA1015 BAFFLE INSTALLATION INTRODUCTION
To protect your floor ALWAYS mount the baffle to the front outlet of the heater.
1. Take out of the heater from the box. The baffle is installed under the air-out-
put as below arrow part
2. Anti-clockwise unscrew the 2 screws for the baffle.
3. Install the baffle as below picture.
4. Clockwise tighten the 2 screws.
Baffle
5. Finished status