Operation Manual

46
Water tank Assembly
Take out water tank first, and then take out valve body cover from water
tank, and then put the water in the tank and tighten the valve body cover.
Put the tank on atomizer Main Body,the temperature of water should not
above 40
O
C.
Main body
cover
Water tank
Loosen
Tighten
Valve body
cover
(Fig.4)
OPERATION
ON/OFF/Timer switch
Speed button control
Mist ON/OFF/Button control
(Fig.5)
1. Always operate the product on a flat, level, steady, and stable surface to
avoid it overturning.
2. Plug the product into a standard electrical outlet.
3. To turn the fan on, rotate the ON/OFF/TIMER switch to the ON position and
push the speed control push button (0-OFF, 1-LOW, 2-MEDIUM, 3-HIGH), as
desired.
4. To turn the fan off, rotate the ON/OFF/TIMER switch to the OFF position.
5. To set the fan and mist timer, rotate the ON/OFF/TIMER switch to the desired
countdown timer (in minutes). The fan and mist will turn off after the time
on the timer has elapsed.
CAUTION: Press only one of the speed control push buttons at a time.
Permanent damage to the switch housing may result if two or more of the
buttons are pressed simultaneously.
4