User Manual

• Be sure the table/floor you are placing this

appliance can bear its weight

• Installation only in a location which is pro-

tected against cross aeration / air draft

• Convection air slots and rear ventilations

of the appliance shall nog be covered /

obstructed

• Do not put any flammable items on top of

the appliance

• This product can NOT be fixed to a wall of

roof

USAGE METHODS

Assembly of the appliance

FFB 106 (Fig 1)

Parts List:

• Fireplace body 2x

• Burner 1x

• Extinguish cover 1x

• Tempered glass 2x

• Screw (M16 x 12mm) 4x

• Screw cap 4x

• Silicone pads 4x

1. Unpack the fireplace and accessories. Check the content for completeness

and any damage incurred in transit. Keep children away from the packing.

2. Only install or place on a solid floor of non-flammable material

3. Remove all packaging and information material before assembly

4. Assemble the fireplace base together and secure the glass onto the both

sides of the fireplace body with 6 screws.

5. Read warning sticker covering the burner, then remove the sticker

6. If something is broken or damaged: do not use the appliance. Return the

appliance to your store immediately.

7. Place the burner into the burning chamber of the fireplace body.

Safe Way to (re-) fill the Appliance

• Before refilling the appliance after extinguished fire: make sure to WAIT FOR

AT LEAST 10 MINUTES.

• NEVER refill with a burning fire! (Fig. 2)

• Use a funnel for filling the appliance with bio ethanol.

• NEVER fill the appliance to a level above the max level indicator!

(Fig 3: max level indicator)

• Open the sliding cover of the fireplace, and fill the burner with the ethanol,

watch carefully and do not overfill or spill. (Fig. 4)

• Remove any spilled ethanol immediately – and before lighting! Use an

appropriate absorbent tissue.