Operation Manual

2 Mode: Press the mode button to set the unit in dehumidify mode or dry

clothes mode

. The selected sign will light up.

3 Humidity: The requested ambient humidity can be set by touching the humidity

button

. (The values can be set to CO~40%~50%~60%.) In dehumidify mode,

when pressing the humidity button

for the first time, the digital display

shows the selected humidity value; When pressing it for the second time, it’s

changing the setting of humidity value.

When the requested ambient humidity e.g. is set to 50% and the unit detects that

the current ambient humidity is higher than 52%RH, the unit starts; when the unit

detects that the current ambient humidity is less than 48%RH, the units stops. For

continuous dehumidifying use the CO setting.

When pressing the humidity button

for five seconds, the digital display

shows the ambient temperature. After five seconds the digital display

returns

to show the ambient humidity.

4 Timer: By pressing the timer button the unit is set to run for ~1h~2h~4h···

or 9h. When the timer function is in use the timer sign

lights up.

5 Tank Full: When the water tank is full the tank full sign lights up; an

alarm sounds 10 times and the unit shuts down. After emptying the water tank and

replacing it in the correct position, the unit will continue dehumidifying when the

compressor, automatically, starts after three minutes.

6 Defrost: When the unit is placed in a room with a low ambient temperature

during operation, the surface of the evaporator may frost, in order to ensure the

normal operation of the unit it is provided with an automatic defrosting function.

When the unit is defrosting the defrost

sign lights up.

AIR FILTER

The dehumidifiers are equipped with a 3-layer filter package to clean the circulated room

air. The 3-layer filter package consists of a screen filter and (separately packed) 3M™ HAF

and active carbon filter. These filters must be placed according to the instructions before

operating the dehumidifiers.

Picture 7

Screen filter; to remove bigger dust particles.

Active carbon filter sheet; to remove odours.

3M™ HAF filter; to remove unhealthy particles from the air such as pollen, bacteria,

animal dander and dust.