Operation Manual
4
93
TROUBLESHOOTING
Checkthefollowingbeforecontactingtechnicalsupport:
Problem Cause Solution
Theunitdoesnot
work.
Thepowercordisnotcon-
nected.
Insert the plug into the wall
outlet.
Therequiredhumiditysetting
is too high.
Turntherequiredhumidityto
a lower desired setting.
Thewatercontainerisfull. Removethewaterfromthe
container.
Thewatercontainerhasnot
beenreplacedcorrectly.
Place the water container in
the correct position.
Thedevicedoesnot
dehumidify.
Theairlterisclogged. Cleantheairlter.
Thetemperatureorrelative
humidityintheroomwhere
the device is operating is too
low.
It is normal that the device
doesnotdehumidifyinthese
conditions.
Thedehumidier
works, but reduces the
relativehumidityinsuf-
ciently.
Theroomistoolarge. We recommend using a
dehumidifier with a greater
capacity.
Therearetoomanysourcesof
humidity.
We recommend using a
dehumidifier with a greater
capacity.
Thereistoomuchventilation. Reduceventilation(e.g.close
curtains and shut doors).
Warn signal filter
exchange/lightring
around the user
interface blinking blue
Dirtylter "Replacethelterpackage
and
resetthelteralarm"
FAILURE OF HUMIDITY AND/OR TEMPERATURE SENSOR
1
Whentheelectricalwireofhumidity/temperaturesensorbreaks,thesymbol will
flashand“0°C-0%RH”isshowedintheLCDdisplay.Thedehumidifierwill
automaticallyturnintocontinuousdehumidifyingmodeandwillnotlongerbe
workingaccordingtotherequiredsethumidity.Theactualdehumidification
performance will not be influenced.
2
When the temperature sensor of the evaporator behind the filter is short circuiting,
thesymbolofdefrost
willwink,andtheapplianceturnsintofactorypre-set
dehumidifyinganddefrostingmode:dehumidifyingfor20minutes,thendefrosting
for5minutes.Inthiscasethedehumidifierwillcontinuetoworkwithlower
efficiency.
CONDITIONS OF WARRANTY
Thereisatwo-yearwarrantyonyourdehumidifierfromthedateofpurchase.Allmaterial
or manufacturing defects will be repaired free of charge.










