User Manual

FUNCTION MENU SETUP

12 TALKAR Talk Around

TX=RX

Turn on Talk Around function, current channel will

transmit at RX frequency, if CTCSS/DCS signaling

is set, it will interchange decoding CTCSS/DCS as

encoding.

OFF Close Talk Around function.

13 OFFSET

Offset Frequency

setup

0-70MHz RX:UHF, TX:VHF or RX:VHF, TX:UHF

14 NAME

Editing Channel

name

a-Z, 0-9

In channel name display mode, will display the

edited channel name.

15 RPLOCK

Busy Channel

Lockout

BUSY

Carrier wave lock, transmitting is prohibited when

received matching carrier wave.

REPEAT

Signaling lock, transmitting is prohibited when

received matching carrier but with mismatching

CTCSS/DCS

OFF Close BCLO function

16 TX TX OFF ON/OFF TX function is enabled/disabled in current channel.

17 BAND VFO band limit ON/OFF Turn on/off band limit function

18 DSPSUB

Sub band display

setup

FREQ Display sub band frequency or channel

VOLT Display current battery voltage

OFF Sub band display is disabled

19 BEEP

Keypad Voice

prompt setup

ON/OFF Turn on/off keypad voice prompt function