User Manual
27
SHORTCUT OPERATIONS
Single-band Switching
CTCSS/DCS encode and decode
To reduce interference from the sub-band when only the main-band is needed. You can use the single-band
switching function to turn off the sub-band quickly.
Continuous pressing of
will cycle LCD display to show Main + Sub-Band / Sub-Band Only / Main-Band
Only.
Press
1. key then press [PF2] to enter into setup.
Press [PF2] key to choose CTCSS, DCS or OFF, when choose DCS, press 2. key to select positive
or negative code.
Rotate Channel selector to choose desired CTCSS/DCS encode and decode.3.
Press 4. key or key to conrm and exit.