User Manual

SHORTCUT OPERATIONS

CTCSS/DCS Scan

Press key, the top left corner of LCD displays " " icon, press key to

enter into CTCSS/DCS scan. Under this state, rotate channel switch to change scan

direction. When scan the matching CTCSS/DCS signaling, it will stay 5seconds and

then go on scanning. Press any other keys except , , key to exit.

NOTE: When this function is on, user must setup 07th menu to be TONE option, then DTMF/5TONE/2TONE/

MSK can be used.

NOTE: This function is invalid when transceiver works in professional mode or the arrow directed channel

no setting CTCSS/DCS signaling.

In current channel, if signaling set as CTCSS, it will scan CTCSS, if sets as DCS, it will scan DCS.