User Manual

09
INSTALLATION & CONNECTION
Match the three grooves of the battery pack with the corresponding 1.
guides on the back of the transceiver and push.
Press the battery pack and transceiver rmly together until the
2.
release latch on the top of the transceiver locks. After hearing a
"click" sounds, the battery has been locked.
To remove the battery pack, slide up the release latch and
3.
remove the pack away from the transceiver.
Installing / Removing the Li-ion Battery
Installing / Removing the Antenna
■ Installing the Antenna:
Screw the antenna into the connector on the top of the transceiver
by holding the antenna base and turning it clockwise until secure.
■ Removing the Antenna:
Turn the antenna anticlockwise to remove it.