User Manual

03
This transceiver is a high performance amateur transceiver with dual band, dual standby, dual display and
other functions. Depending on your need, you can set the radio to operate as an Amateur Transceiver or
Professional Transceiver. There are 3 levels of operation menu to set functions as you need. It is easy and
convenient.
Operation Mode:1.
Please refer to "Display Mode" in Page 42.
Amateur Transceiver Mode:2. Except setting as CH mode, others considered
as Amateur transceiver mode. Under this mode, press key to switch
between Channel mode and VFO.
Frequency + Channel mode: A. At this mode, When set display as "FREQ", it
enters into Frequency+Channel mode, new setting of channel operation and
shortcut operation can be temporarily used by user. Once the radio is turned
off or switched to another channel, the temporary setting will be erased and
back to initial settings.(As pic 1)
Channel+Name Tag Mode:B. When set display as "NAME", it enters into
Channel+Name Tag Mode. At this mode, it will display corresponding
channel name when the current channel is edited with name. Otherwise, it
will display frequency + channel. Its operations are the same as frequency +
channel mode. (As pic 2)
VFO Mode(Frequency mode): C. This mode shows only frequency on the
display. Shortcut operation and Channel setting will be changed & stored as
the latest value permanently. Once the radio is turned off or changed to new
OPERATION MODE
(Pic 1)
(Pic 2)
(Pic 3)
(Pic 4)