User's Manual
33
Problem Corrective Action
No power.
A.The battery pack may be exhausting.
Recharge or replace the battery pack.
B. The battery pack may not be installed
correctly. Remove the battery pack and
install it again.
C. The power switch is broken; send it to
local dealers to repair.
D. Battery touch is broken; send it to local
dealers to repair.
Battery power dies
shortly after correctly
charging.
The battery pack life is nished. Replace
the battery pack with a new one.
Transceiver cannot scan
The channels are not in scan list.
(Professionals set it.)
All band noisy after
programmed or green
light always lightens
Turn on squelch when programmed. Non-
professionals are advised not to adjust
this function.
No sound after using
microphone for a while
Earphone jack is broken. (Please contact
with local dealers to repair it.)
Communication distance
becomes short, and it is
low sensitivity
A.Check whether the antenna is in good
condition and the antenna base do not
come adrift.
B. The selected mode frequency is not
in accord with local frequency when
programming.
C. Whether it has set in low power output.
(Please contact with local dealers to
repair it.)
Cannot talk to or hear
other members in your
group
A. Different frequency or channel, please
change it.
B. Different CTCSS / DCS please reset it.
C. Out of communication range.
TROUBLE SHOOTING GUIDE