User's Manual

14
dot on the LCD twinkles. Under this state, press / to set
desired current frequency. Press to increase the frequency
value by step, to decrease the frequency value.
Press [PF1] or [PF2] key to confirm the selected
frequency and exit the frequency setting mode. After
entering the setting mode, if users do not set the
frequency or not exit the mode after adjusting the
frequency, the transceiver will exit the setting mode automatically
after 10seconds.
BASIC OPERATIONS
Fast Adjust Frequency
Under VFO( frequency mode), press repeatedly till the decimal
dot on the LCD twinkles. Under this state, press
/ to set
desired current frequency. Press to increase the frequency
value by 1MHZ, to decrease the frequency value by 1MHZ.
Press [PF1] or [PF2] key to conrm the selected frequency and exit
the frequency setting mode. After entering the setting mode, if users
do not set the frequency or not exit the mode after
adjusting the frequency, the transceiver will exit the
setting mode automatically after 10seconds.
NOTE:
Under channel mode, this function would be hidden.This
function is disabled as factory default. You can enable this
function via programming software.
Channels Selection
Under channel mode, to choose the desired channel, rstly, users
NOTE:
Under channel mode, this function would be hidden. VFO
function is disabled as factory default. You can enable this
function via programming software.