User's Manual
33
OFF: Close Frequency reverse function.
4. Press
key or key to conrm and exit.
Talk Around ON/OFF
When this function is on, transceiver will cut communication with repeater.
1. Press key, the top left corner of LCD displays“ ” icon, then press key enter into function menu.
2. Press
/ key to choose NO. 10 function item, it shows “TALKAR” on LCD.
3. Rotate channel switch to choose desired setup.
TX-RX: Turn on Talk Around function, current channel will transmit at RX
frequency, if CTCSS/DCS signaling is set, it will interchange decoding
CTCSS/DCS as encoding.
OFF: Close Talk Around function.
4. Press
key or key to conrm and exit.
Offset Frequency setup
This function works through repeater. When repeater receives signals at one frequency, it transmits at the
other frequency. The offset between these two frequencies is called offset frequency.
1. Press
key, the top left corner of LCD displays “ ” icon, then press
key enter into function menu.
2. Press
/ key to choose NO. 11 function item, it shows “OFFSET” on LCD.
FUNCTION MENU SETUP