User's Manual
32
According to the national conditions of various countries, it can be set for communication by wide band or
narrow band.
1. Press key, the top left corner of LCD displays “ ” icon, then press
key enter into function menu.
2. Press
/ key to choose NO. 08 function item, it shows “W/N” on LCD.
3. Rotate channel switch to choose desired setup.
4. Press
key or key to conrm and exit.
Frequency Reverse
1. Press
key, the top left corner of LCD displays“ ” icon, then press key enter into function menu.
2. Press / key to choose NO. 09 function item, it shows “REV” on LCD.
3. Rotate channel switch to choose desired setup.
ON: Turn on Frequency reverse function, TX and RX frequency of current
channel will be interchanged. If CTCSS/DCS signaling is set, it also will
be interchanged.
FUNCTION MENU SETUP
NOTE: This function item will hide automatically when main band and sub main band are under channel mode.
Band Selection
12.5K: Narrow band