User's Manual

30
Squelch mode setup
This function is used for setting squelch mode to prevent receiving unrelated singals.
1. Press
key, the top left corner of LCD displays “ ” icon, then press key enter into function menu.
2. Press
/ key to choose NO. 06 function item, it shows “SIGNAL” on LCD.
3. Rotate channel switch to choose desired squelch mode.
Optional signaling setup
DTMF and 5TONE functions are similar to CTCSS/DCS, it has special call functions, such as ANI, PTT ID, All call,
Alarm, remotely kill, remotely stun and remotely waken, etc..
1. Press
key, the top left corner of LCD displays “ ” icon, then press
key to enter into function menu.
2. Press
/ key to choose NO. 05 function item, it shows “TONDEC” on LCD.
3. Rotate channel switch to choose desired optional signaling.
DTMF: current optional signaling is DTMF
5TONE/2TONE: current optional signaling is 5TONE/2TONE
OFF: close optional signaling
4. Press
key or key to conrm and exit.
FUNCTION MENU SETUP
Default configuration is
5TONE , 2TONE
can be customized according to different market
requirements.