User's Manual
29
3. Press key to choose CTCSS,DCS or OFF, when DCS signaling is selected,
press
key to choose DCS positive or inverse code.
4. Rotate channel switch to choose desired CTCSS/DCSencode/decode.
CTCSS: 62.5HZ~254.1HZ, 51groups in total, and 1 group user-dened code.
DCS: 000N-777I, 232 groups in total. “N” stands for positive code, “I”
stands for inverse code.
5. Press
or key to conrm and exit.
FUNCTION MENU SETUP
5TONE encode must be programmed by software, only the groups with editing 5TONE can be
selected. When 5TONE encode is editing with name, transceiver will display name, otherwise
will display “ CALL XX ”.
Default configuration is 5TONE, 2TONE can be customized according to different market
requirements.
5TONE/2TONE encode group selection
1. Press
key, the top left corner of LCD displays “ ” icon, then press key to enter into function
menu.
2. Press / key to choose NO. 04 function item, it shows “5T-ENC”/”2T-ENC”
on LCD.
3. Rotate channel switch to choose desired 5TONE encode group.
CALL00~CALL99, 100 groups in total for optional.
4. Press [PTT] key to transmit selected 5TONE encode, press
key or key to conrm and exit.