User's Manual

FUNCTION MENU SETUP

CTCSS/DCS Decode Setup

If this function is enabled, you can ignore (can not hear) other unrelated call at the same frequency.

1. Press

key, the top left corner of LCD displays “ ” icon, then press

key to enter into function menu.

2. Press

/ key to choose NO. 02 function item, it shows “R-CDC” on LCD.

3. Press

key to choose CTCSS,DCS or OFF, when DCS signaling is selected,

press

key to choose DCS positive or inverse code.

4. Rotate channel switch to choose desired CTCSS/DCS code.

CTCSS:62.5HZ~254.1HZ,51 groups in total, and 1 group user-dened code.

DCS: 000N-777I, 232 groups in total. “N” stands for positive code, “I”

stands for inverse code.

5. Press

or key to conrm and exit.

CTCSS/DCS Encode / Decode Synchronous Setup

This function is for adjusting CTCSS/DCS encode/decode synchronous.

1. Press key, the top left corner of LCD displays “ ” icon, then press

key to enter into function menu.

2. Press

/ key to choose NO. 03 function item, it shows “RT-CDC” on LCD.

5. Press or key to conrm and exit.

Note: User-defined CTCSS decode must be setup by programming software.