User's Manual

27
Menu 1-14 of this transceiver are channel operations.Channel operations temporarily changed the functions
of current channel. When power off or channel has been changed, the relevant setup will be erased. Only
under VFO mode, the channel operations will be saved until next change. Menu 15-31 is background
operation, it is valid for all channels, the relevant setup will be saved until next change.
The operating methods are as follows:
1. Press
key, the top left corner of LCD displays “ ” icon, then press key to enter function menu.
2. Press
/ key to choose desired function.
3. Rotate channel switch to choose desired setting.
4. Press
key or key to conrm and exit.
FUNCTION MENU SETUP
Note: User-defined CTCSS encode must be setup by programming software.
CTCSS/DCS Encode Setup
1. Press
key, the top left corner of LCD displays “ ” icon, then press
key to enter into function menu.
2. Press
/ key to choose NO. 01 function item, it shows “T-CDC” on LCD.
3. Press
key to choose CTCSS,DCS or OFF, when DCS signaling is selected,
press
key to choose DCS positive or inverse code.
4. Rotate channel switch to choose desired CTCSS/DCS code.
CTCSS: 62.5HZ-254.1HZ, 51groups in total, and 1 group user-dened code.
DCS: 000N-777I, 232 groups in total. “N” stands for positive code, “I” stands for
inverse code.