User's Manual

25
SHORTCUT OPERATIONS
1. LCD displayed “
S
” means the current channel will not be scanned.
2. “
S
” icon disappeared means the current channel will be scanned.
Frequency Reverse
Under standby state, press
key, the top left corner of LCD displays “ ” icon, then press key to
set arrow directed channel as frequency reverse, repeat above operation to turn off frequency reverse.
1. When LCD displays “R” icon, it means current arrow directed channel open the
frequency reverse function, the TX frequency and RX frequency is interchanged,
if CTCSS/DCS signaling is set, it will also interchange.
2. When “R” icon disappears, it means reverse function is close.
TX Power selection
Under standby state, press
key, the top left corner of LCD displays “ ” icon,
then press key to choose High/Low power for current arrow directed channel.
1. When LCD displays “L” icon, it means low power is chose.
2. When LCD displays “H” icon, it means high power is chose.
Stopwatch function
1. Under standby state, press
key, the top left corner of LCD displays “ ”
icon, then press
to enter into stopwatch function.
2. Press key to start timing. Under this state, press key to pause timing.