User's Manual

INSTALLATION & CONNECTION

Installing Optional Speaker / Microphone

■ Installing the Antenna:

Screw the antenna into the connector on the top of

the transceiver by holding the antenna at its base

and turning it clockwise until secure.

■ Removing the Antenna:

Anticlockwise turn the antenna to remove it.

Installing / Removing the Belt ClipInstalling the Antenna

■ Installing the Belt Clip:

Place the belt clip to the corresponding grooves on the

back of the transceiver, and then clockwise screw it.

■ Removing the Belt Clip:

Anticlockwise turn screws to remove the belt clip.