A1.0-13/03 A1.
TWO WAY RADIO FCC ID:T4K-QZQX3318 DUAL BAND HANDHELD RADIO INSTRUCTION MANUAL
THANK YOU! The transceiver will provide you with reliable, clear and efficient communication service. The transceiver introduces innovative DSP digital signal processing technology, high degree integration, it is including kinds of professional function, best stability and great reliability as well as exterior smooth lines, novel, fashionable, sturdy and durable.
CAUTIONS The transceiver is excellent designed with advanced technology. The following tips will be helpful for you in performing your obligation under warranty and understanding the safety of transceiver usage. 1.Keep the transceiver and accessories away from children. 2.Please do not try to open or modify the transceiver without permission, non-professionals operation may also cause damage. 3.Please use assorted battery and charger to avoid damage. 4.
TABLE OF CONTENTS UNPACKING ................................................................................................................................................................................................ 01 Supplied Accessories ......................................................................................................................................................................... 01 STANDARD ACCESSORIES/ADDITIONAL ACCESSORIES ................................................
TABLE OF CONTENTS Switch between Main band and Sub band ............................................................................................................................... 16 Switch between Channel mode and VFO mode .................................................................................................................... 16 Channel Adjusting ..................................................................................................................................................
TABLE OF CONTENTS Stopwatch function................................................................................................................................................................................ 25 DTMF code Transmit and Enquiry ................................................................................................................................................ 26 Keypad lock .........................................................................................................
TABLE OF CONTENTS DTMF Transmitting Time Setup...................................................................................................................................................... 39 Squelch level setup .............................................................................................................................................................................. 40 Scan Dwell Time Setup ............................................................................................
UNPACKING Please carefully unpack the transceiver. We recommend that you identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, please contact with dealers immediately.
STANDARD ACCESSORIES/ADDITIONAL ACCESSORIES Standard Accessories Antenna*1 Li-ion Battery QA09UV2 145/435MHz Battery Charger AC Adaptor QBC-26L (12V/500mA) QPS-01 QB-26L(1500mAh) Belt Clip BC01 Hand Strap GS01 *1.Note: For frequency band of antenna, please refer to label indicated in the bottom of the antenna.
OPERATION MODE (AMATEUR TRANSCEIVER OR PROFESSIONAL TRANSCEIVER) The transceiver is a high performance amateur transceiver with dual band, dual standby, dual display and other kinds of functions. According to practical application,you can set the radio operates as Amateur Transceiver or Professional Transceiver. There are also 3 levels operation menu to set functions as per you need. It is easy and convenient. 1. Operation Mode: A.
WORKING MODE (AMATEUR TRANSCEIVER OR PROFESSIONAL TRANSCEIVER) C. VFO Mode(Frequency mode): This mode shows only frequency on the display. Shortcut operation and Channel setting will be changed & stored as the latest value permanently. Once the radio is turned off or changed to new VFO frequency, the value is remained until next change.(As pic 3) 3. Professional Transceiver Mode:When set display mode as "CH",it enters into Professional Transceiver mode.
BATTERY INFORMATION Charging Operation The battery is not charged at the factory, please charge it before use. Charge the battery for the first time after purchase or extended storage (more than 2 months) may not bring the battery to its normal operating capacity. After repeating fully charge/ discharge cycle for two or three times, the operating capacity will reach the best performance. The battery life is over when its operating time decreases even though it is fully and correctly charged.
BATTERY INFORMATION ▲ Do not recharge the battery if it is already fully charged. This may shorten the life of the battery or damage the battery. ▲ Do not charge the battery or transceiver if it is damp. Dry it before charging to avoid danger. WARNING: When keys or ornamental chains and other electric metals contact with the battery terminals, the battery may cause damage or hurt bodies.
BATTERY INFORMATION NOTE: When charging a power-on transceiver equipped with battery, the LED will not turn into green to show the full charge status. Only when turn off the transceiver, the LED can indicate normally. Because when the transceiver is power on, it would consumes energy, the charger cannot detect when battery has been fully charged, the charger will charge battery in voltage consumption and fail to indicate correctly. 5.
BATTERY INFORMATION Charging Prompt 1.Self- examination: When charging, ORANGE light twinkles for 1 second and goes out. That means the charger has passed its self-examination and it can charge the battery normally. If the light remains orange or the red light twinkles, which means the charger can not pass its self-examination or charge the battery. 2.
INSTALLATION & CONNECTION Installing / Removing the Li-ion Battery 1.Match the three grooves of the battery pack with the corresponding guides on the back of the transceiver and push. 2.Press the battery pack and transceiver firmly together until the release latch on the top of the transceiver locks. After hearing a "click" sounds, the battery has been locked. 3.To remove the battery pack, slide up the release latch and remove the pack away from the transceiver.
INSTALLATION & CONNECTION Installing / Removing the Antenna ■ Installing the Antenna: Screw the antenna into the connector on the top of the transceiver by holding the antenna base and turning it clockwise until secure. ■ Removing the Antenna: Turn the antenna anticlockwise to remove it. Installing / Removing the Belt Clip ■ Installing the Belt Clip: Place the belt clip to the corresponding grooves on the back of the transceiver, and then Clockwise screw it.
INSTALLATION & CONNECTION Installing Optional Speaker / Microphone ■ Installing the Antenna: Screw the antenna into the connector on the top of the transceiver by holding the antenna at its base and turning it clockwise until secure. ■ Removing the Antenna: Anticlockwise turn the antenna to remove it. Installing / Removing the Belt ClipInstalling the Antenna ■ Installing the Belt Clip: Place the belt clip to the corresponding grooves on the back of the transceiver, and then clockwise screw it.
GETTING ACQUAINTED LCD Display On LCD display screen, you will see various icons which stand for the selected functions and sometimes you may forget the meaning of them. Here you will find the following table extremely useful.
GETTING ACQUAINTED 1 2 3 4 7 10 8 9 5 6 13
GETTING ACQUAINTED 1 Antenna 2 Selector Knob 3 Power / Volume switch Rotate it clockwise to turn on transceiver, rotate it anticlockwise until heard "click" to turn off the transceiver. When transceiver is power on, rotate it clockwise to increase volume, anticlockwise to reduce volume.
BASIC OPERATIONS Turn the Radio On & OFF Under power-off state, please turn [POWER]/ [VOLUME] clockwise to turn on the transceiver. Under power-on state, please turn [POWER]/ [VOLUME] anticlockwise to turn off the transceiver. Adjusting Volume Under power-on state, turn [POWER] / [VOLUME] to adjust volume. Clockwiseup, anticlockwise -down. When adjusting the volume, user can press the key programmed as Squelch Off to monitor current volume firstly.
BASIC OPERATIONS Switch between Main band and Sub band Under standby state, press key to switch channel between Main band and Sub band. Arrow directs the current operational channel. Switch between Channel mode and VFO mode Under standby state, press mode(VFO). key to set main band as Channel mode or frequency Channel Adjusting When transceiver in Channel mode or FM radio channel mode, rotate channel switch to adjust channel.
BASIC OPERATIONS Frequency Input by Keypad Under frequency mode or FM radio frequency mode, you can directly enter frequency through keypad. 1. When your transceiver is under Channel mode, press key to switch into VFO. NOTE: When the transceiver is under Channel mode, it shows current channel number on the right of main frequency. 2.Enter the desired frequency by keypad. NOTE: The frequency input of main channel or FM radio is relevant to the stepping and transceiver frequency range.
BASIC OPERATIONS FM Channel Searching When transceiver in FM radio mode, press key, LCD displays FUNC icon, then press to start FM searching. When one station is sought, LCD displays current station frequency, you can listen to current station. Squelch Off Momentary / Squelch Off Side key [PF2] can be setup for Squelch off Momentary or Squelch off function by programming software. 1.Squelch off: Press [PF2] key, squelch circuit is not mute, back-ground noise can be heard.
BASIC OPERATIONS Transmitting According to [PF2] key setup in programming software, hold [PF2] key to monitor the channel to ensure it is not busy, press PTT key and talk to speaker. Please keep the distance between mouse and speaker to be 2.5-5CM, speak in normal tone to get the best acoustic fidelity. NOTE: When press and hold PTT key, transceiver is transmitting if the red LED light is on, release PTT key to receive calls.
BASIC OPERATIONS Side key [PF2] function instruction 1. Squelch off: Press [PF2] key, squelch circuit is not mute, back-ground noise can be heard. Press [PF2] key again, squelch circuit is mute. 2. Squelch off Momentary: Press and hold [PF2] key, squelch circuit is not mute, back-ground noise can be heard. Release [PF2] key, squelch circuit is mute. 3. Transmit DTMF/5TONE signaling: Press and hold [PTT] key, then press [PF2] key to transmit selected DTMF/5TONE signaling.
BASIC OPERATIONS Delete channel 1. Under standby state, press key, the top left corner of LCD displays “ switch into channel mode, channel number flashes. ” icon, press key to 2. Rotate channel switch to select desired deleting channel number. 3. Press key, the top left corner of LCD displays “ ” icon, press and hold key until transceiver emits “DUDU” beep and clear up frequency information of current channel, deletion is successful. NOTE: This process can be applied for deleting FM radio channels.
SHORTCUT OPERATIONS Turn On/ Off FM Radio Under standby state, press key, the top left corner of LCD displays “ ” icon, then press key, LCD displays “HF ON” and current FM radio frequency, FM radio function is on. When FM radio is on, press key, LCD displays “HF OFF”, FM radio is mute. When FM radio is on, press key, the top left corner of LCD displays “ ” icon, press key to turn off FM radio and return to transceiver state. NOTE: Re-start transceiver also can exit FM radio function.
SHORTCUT OPERATIONS CTCSS/DCS Scan key, the top left corner of LCD displays “ ” icon, press key to Press enter into CTCSS/DCS scan. Under this state, rotate channel switch to change scan direction. When scan the matching CTCSS/DCS signaling, it will stay 5seconds and then go on scanning. Press any other keys except , , key to exit. NOTE: This function is invalid when transceiver works in professional mode or the arrow directed channel no setting CTCSS/DCS signaling.
SHORTCUT OPERATIONS Frequency/Channel Scan key, the top left corner of LCD displays “ Under corresponding mode, press key to start frequency scan or channel scan. 1. Frequency Scan ” icon, then press Under VFO mode, frequency scan is available. This function is used for monitoring signal of various communication frequency by transceiver ‘step’ setup, press numeric key or key to exit. 2. Channel Scan Under channel mode, this function is used for monitoring signal of each channel in this mode.
SHORTCUT OPERATIONS 1. LCD displayed “ S ” means the current channel will not be scanned. 2. “ S ” icon disappeared means the current channel will be scanned. Frequency Reverse key, the top left corner of LCD displays “ ” icon, then press key to Under standby state, press set arrow directed channel as frequency reverse, repeat above operation to turn off frequency reverse. 1.
SHORTCUT OPERATIONS When timing is pause, press 3. Press [PF1], [PF2] or NOTE: During timing, press key to continue timing. key to exit stop watch function. key to stop timing and displays current data, press this key again to clear timer. DTMF code Transmit and Enquiry key, the top left corner of LCD displays “ ” icon, then press 1. Press DTMF data and group number (total 16groups) of current group. key, LCD displays 2.
FUNCTION MENU SETUP Menu 1-14 of this transceiver are channel operations.Channel operations temporarily changed the functions of current channel. When power off or channel has been changed, the relevant setup will be erased. Only under VFO mode, the channel operations will be saved until next change. Menu 15-31 is background operation, it is valid for all channels, the relevant setup will be saved until next change. The operating methods are as follows: 1.
FUNCTION MENU SETUP 5. Press or key to confirm and exit. CTCSS/DCS Decode Setup If this function is enabled, you can ignore (can not hear) other unrelated call at the same frequency. 1. Press key, the top left corner of LCD displays “ ” icon, then press key to enter into function menu. 2. Press / 3. Press press key to choose NO. 02 function item, it shows “R-CDC” on LCD. key to choose CTCSS,DCS or OFF, when DCS signaling is selected, key to choose DCS positive or inverse code. 4.
FUNCTION MENU SETUP 3. Press press key to choose CTCSS,DCS or OFF, when DCS signaling is selected, key to choose DCS positive or inverse code. 4. Rotate channel switch to choose desired CTCSS/DCSencode/decode. CTCSS: 62.5HZ~254.1HZ, 51groups in total, and 1 group user-defined code. DCS: 000N-777I, 232 groups in total. “N” stands for positive code, “I” stands for inverse code. 5. Press or key to confirm and exit. 5TONE/2TONE encode group selection 1.
FUNCTION MENU SETUP Optional signaling setup DTMF and 5TONE functions are similar to CTCSS/DCS, it has special call functions, such as ANI, PTT ID, All call, Alarm, remotely kill, remotely stun and remotely waken, etc.. 1. Press key, the top left corner of LCD displays “ ” icon, then press key to enter into function menu. 2. Press / key to choose NO. 05 function item, it shows “TONDEC” on LCD. 3. Rotate channel switch to choose desired optional signaling.
FUNCTION MENU SETUP SQ: When current channel received matching RF signals, transceiver can hear the talking from the other party. CT/DCS: When current channel received matching RF signals and matching CTCSS/ DCS signaling, transceiver can hear the talking from the other party. TONE: When current channel received matching RF signals and matching optional signaling, transceiver can hear the talking from the other party.
FUNCTION MENU SETUP NOTE: This function item will hide automatically when main band and sub main band are under channel mode. Band Selection According to the national conditions of various countries, it can be set for communication by wide band or narrow band. 1. Press key, the top left corner of LCD displays “ ” icon, then press key enter into function menu. 2. Press / key to choose NO. 08 function item, it shows “W/N” on LCD. 3. Rotate channel switch to choose desired setup. 12.5K: Narrow band 4.
FUNCTION MENU SETUP OFF: Close Frequency reverse function. 4. Press key or key to confirm and exit. Talk Around ON/OFF When this function is on, transceiver will cut communication with repeater. 1. Press key, the top left corner of LCD displays“ ” icon, then press 2. Press / key enter into function menu. key to choose NO. 10 function item, it shows “TALKAR” on LCD. 3. Rotate channel switch to choose desired setup.
FUNCTION MENU SETUP 3. Rotate channel switch to choose desired offset frequency. Frequency range is 00-70MHZ. 4. Press key or key to confirm and exit. Editing Channel name 1. Press key, the top left corner of LCD displays“ ” icon, then press 2. Press / 3. Rotate channel switch to choose desired character, press current character and move shift to next character. Press previous character. 4. Press key enter into function menu. key to choose NO. 12 function item, it shows “-” on LCD.
FUNCTION MENU SETUP BUSY: Carrier wave lock, transmitting is prohibited when received matching carrier wave. REPEAT: Signaling lock, transmitting is prohibited when received matching carrier but with unmatching CTCSS/DCS. OFF: Close BCLO function. 4. Press key or key to confirm and exit. TX OFF When this function is on, [PTT] key is unavailable. Current channel of transceiver only works under receiving mode. key, the top left corner of LCD displays “ ” icon, then press 1.
FUNCTION MENU SETUP 1. Press key, the top left corner of LCD displays “ ” icon, then press key enter into function menu. 2. Press / key to choose NO. 15 function item, it shows “BAND” on LCD. 3. Rotate channel switch to choose desired setup. ON: Band limit is enabled. OFF: Band limit is disabled. 4. Press key or key to confirm and exit. Sub Band Display Setup key, the top left corner of LCD displays “ ” icon, then press key enter into function 1. Press menu. 2. Press / key to choose NO.
FUNCTION MENU SETUP Keypad Voice Prompt Setup 1. Press key, the top left corner of LCD displays “ ” icon, then press key enter into function menu. 2. Press / key to choose NO. 17 function item, it shows “BEEP” on LCD. 3. Rotate channel switch to choose desired setup. ON: Keypad Voice Prompt is enabled. OFF: Keypad Voice Prompt is disabled. 4. Press key or key to confirm and exit. Time-Out-Timer (TOT) The purpose of Time-out-Timer is to restrict transceiver for continuous long-term transmission.
FUNCTION MENU SETUP Voice Operated Transmission (VOX) Setup When this function is on, the transmitting can be started by voice, no need to press [PTT] key. 1. Press key, the top left corner of LCD displays “ ” icon, then press key enter into function menu. 2. Press / key to choose NO. 19 function item, it shows “VOX” on LCD. 3. Rotate channel switch to choose desired setup. 1~10 : Total 10 VOX levels for optional. OFF: VOX function is disabled. 4. Press key or key to confirm and exit.
FUNCTION MENU SETUP Automatic Power Off Time setup When this function is on, transceiver will automatic power off when reach the preset time. key, the top left corner of LCD displays “ ” icon, then press key enter into function 1. Press menu. / key to choose NO. 21 function item, it shows “APO” on LCD. 2. Press 3. Rotate channel switch to choose desired setup. 30minutes ~ 2hours: Total 3 levels for optional. OFF: Automatic Power Off Time is disabled. key or key to confirm and exit. 4.
FUNCTION MENU SETUP Squelch level setup This function is used for setup intensity of receiving signals, transceiver will hear calls when receiving signal intensity achieve preset data, otherwise, transceiver will keep mute. key, the top left corner of LCD displays " " icon, then press 1. Press key enter into function menu. / key to choose NO. 23 function item, it shows “SQL” on LCD. 2. Press 3. Rotate channel switch to choose desired setup.
FUNCTION MENU SETUP Function Icon Stay Time Setup key, the top left corner of LCD displays “ ” icon, then press 1. Press key enter into function menu. / key to choose NO. 25 function item, it shows “FTIME” on LCD. 2. Press 3. Rotate channel switch to choose desired setup. FUNCT: When finished function setting or enter into function menu, icon disappeared.
FUNCTION MENU SETUP 2. Press / key to choose NO. 26 function item, it shows “LIGHT” on LCD. 3. Rotate channel switch to choose desired setup. AUTO: Backlight will automatic closed after a period. OFF: Always off. ON: Always on. 4. Press key or key to confirm and exit. LCD Backlight Color Setup There are three kinds of backlight color for optional. key, the top left corner of LCD displays“ ” icon, then press 1. Press key enter into function menu. / key to choose NO.
FUNCTION MENU SETUP 2. Press / key to choose NO. 28 function item, it shows “ID” on LCD. 3. Rotate channel switch to choose desired setup. The ID code displaying on LCD is transceiver self ID code. 4. Press key or key to confirm and exit. NOTE: When current channel add 5TONE to be optional signaling, LCD displays 5TONE self ID code, otherwise displays DTMF self ID code.
FUNCTION MENU SETUP 1. Press key, the top left corner of LCD displays“ ” icon, then press key enter into function menu. 2. Press / key to choose NO. 30 function item, it shows “SAVE” on LCD. 3. Rotate channel switch to choose desired setup. OFF: Battery Save is disabled.
SENIOR FUNCTION OPERATIONS Display Mode Setup There are three kinds of display modes for optional. 1. Press [PF2] key to turn on radio, hold [PF2] key until transceiver emits beep. 2. Press / key to choose No. 01 function item, it shows “DSP” on LCD. 3. Rotate channel switch to choose desired setup. FREQ: Frequency + Channel mode, transceiver displays current channel name + key to switch into VFO mode.
SENIOR FUNCTION OPERATIONS FACT: Resume all items to factory default, including channel and background settings. INIT: Resume background settings to factory default, channel operations are keeping. 4. Press key to exit current selection key to confirm current selection. 5.
Programming software starting (Takes Windows XP system for example) 1.Double Click “QPS3318UV setup.exe”, then go on installing as computer command. 2.Click “START” menu of computer, choose “USB To COM” in QPS3318UV item and click it. Please install USB To Comport drive program as computer command. 3.Please plug PC03 programming cable into USB port of PC device, then connect to transceiver. 4.
TECHNICAL SPECIFICATION General VHF:136~174MHz Frequency Range UHF:400~480MHZ Channel Capacity 200 channels Channel Spacing 12.5KHz (narrow band) Phase-locked 0.1KHz Step Operation Voltage 7.4V DC ±20% More than 12 Hours(1500mAh),by 5-5Battery Life 90 working cycle Frequency ±2.
TROUBLE SHOOTING GUIDE Problem Corrective Action No power A.The battery may be exhausting. Recharge or replace the battery. B.The battery may not be installed correctly. Remove the battery and install it again. C.The power switch is broken; send it to local dealers to repair. D.Battery touch is broken; send it to local dealers to repair. Battery power dies shortly after charging. The battery life is finished. Replace the battery pack with a new one.
TROUBLE SHOOTING GUIDE Can not power on or frequent power off The receiving sound gets low or intermittent Receiving intermittent with in big noise Loudspeaker become lower or with“ka ka”sound after using a certain time Receive voice from the other party but can not transmit Receiving indicator with green light but no sound 50 Check weather the battery touch is out of sharp or broken. Check weather the MIC is stoppage. Otherwise, please contact with local dealers to repair it. A.
ATTACHED CHART CTCSS Frequency Chart 1 2 3 4 5 6 7 8 9 10 11 62.5 67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 12 13 14 15 16 17 18 19 20 21 22 94.8 97.4 100.0 103.5 107.2 110.9 114.8 118.8 123.0 127.3 131.8 23 24 25 26 27 28 29 30 31 32 33 136.5 141.3 146.2 151.4 156.7 159.8 162.2 165.5 167.9 171.3 173.8 34 35 36 37 38 39 40 41 42 43 44 177.3 179.9 183.5 186.2 189.9 192.8 196.6 199.5 203.5 206.5 210.7 45 46 47 48 49 50 51 52 218.1 225.7 229.1 233.6 241.8 250.3 254.
ATTACHED CHART 1024 groups DCS frequency chart 000 010 020 030 040 050 060 070 100 110 120 130 140 150 160 170 200 210 220 230 240 250 52 001 011 021 031 041 051 061 071 101 111 121 131 141 151 161 171 201 211 221 231 241 251 002 012 022 032 042 052 062 072 102 112 122 132 142 152 162 172 202 212 222 232 242 252 003 013 023 033 043 053 063 073 103 113 123 133 143 153 163 173 203 213 223 233 243 253 004 014 024 034 044 054 064 074 104 114 124 134 144 154 164 174 204 214 224 234 244 254 005 015 025 035 0
ATTACHED CHART 260 270 300 310 320 330 340 350 360 370 400 410 420 430 440 450 460 470 500 510 520 530 261 271 301 311 321 331 341 351 361 371 401 411 421 431 441 451 461 471 501 511 521 531 262 272 302 312 322 332 342 352 362 372 402 412 422 432 442 452 462 472 502 512 522 532 263 273 303 313 323 333 343 353 363 373 403 413 423 433 443 453 463 473 503 513 523 533 264 274 304 314 324 334 344 354 364 374 404 414 424 434 444 454 464 474 504 514 524 534 265 275 305 315 325 335 345 355 365 375 405 415 425
ATTACHED CHART 540 550 560 570 600 610 620 630 640 650 660 670 700 710 720 730 740 750 760 770 541 551 561 571 601 611 621 631 641 651 661 671 701 711 721 731 741 751 761 771 542 552 562 572 602 612 622 632 642 652 662 672 702 712 722 732 742 752 762 772 543 553 563 573 603 613 623 633 643 653 663 673 703 713 723 733 743 753 763 773 544 554 564 574 604 614 624 634 644 654 664 674 704 714 724 734 744 754 764 774 545 555 565 575 605 615 625 635 645 655 665 675 705 715 725 735 745 755 765 775 546 556 566
SAFETYTRAINING INFORMATION Your Qixiang Electron Science & Technology Co., Ltd radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the “General Population” in an uncontrolled environment.