User's Manual

Professional
FM Transceiver
14
SUMMARY
Power on the radio
Adjust Volume
LED Indicator
Alert Tone
Power on the radio: Turn on the radio by turning the Power/Volume switch clockwise till a click is
heard, and you will hear a Power up beep if the dealer has set it. The radio is now in Rx mode.
Rotate the Power/Volume knob to adjust the volume. Turn clockwise to increase the volume and
counterclockwise to decrease the volume.
LED indicator shows the transceiver work state.
Red LED turns on- Transceiver is transmitting.
Green LED turns on- Transceiver is power on or receiving, or check the signal.
Alert tone indicates the radio state or the data receive response.
Continuous Tone: Continue pronouncing until end.
Cycle Tone: Depend on the radio preset time to pronounce the tone by cycle. The tone will automatic
turn on, off and repeat.
Repeat Tone:Repeat the tone until user turn off it.
Moment Tone:pronounce a short tone, the time is dened by the radio itself.