A1.
D868 USER'S MANUAL
THANK YOU! Thank you very much for choosing our transceiver. The transceivers provide you with reliable, clear and efficient communication service. This transceiver introduces innovative DMR digital processing system to achieve high-fidelity voice processing with multiple groups, communication encryption, call security, great stability and reliability. This transceiver includes both analog and DMR digital communication with CTCSS/DCS encode/decode function.
SAFETY TRAINING INFORMATION our Qixiang Electron Science& Technology Co., Ltd radio generators RF electromagnetic during transmit mode.This radio is designed for and classified as"Occupational Use Only", meaning it must be used only during the course of employment by individuals aware of the hazards,and the ways To Minimize Such hazards. This radio is NOT intended for use by the"General Population" in an uncontrolled environment.
Electromagnetic Interference/Compatibility During transmissions, Qixiang Electron Science& Technology Co., Ltd radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.
SAFETY INFORMATION FOR USER The transceiver is excellently designed with advanced technology. Please observe the following precautions to perform your obligation, prevent personal injury and ensure the safety of transceiver usage. 1. Keep the transceiver and accessories away from children. 2. Please do not try to open or modify the transceiver without permission, non-professionals process may also cause damage. 3. Please use assorted battery and charger to avoid damage. 4.
CONTENTS UNPACKING .........................................................................................................................................1 Supplied Accessories........................................................................................................................... 1 STANDARD ACCESSORIES.................................................................................................................2 Standard Accessories.....................................................
CONTENTS Adjust Volume...................................................................................................................................... 14 LED Indicator....................................................................................................................................... 14 Alert Tone............................................................................................................................................. 14 Receive and make a digital call..............
CONTENTS Scan . .................................................................................................................................................. 21 Scan lists........................................................................................................................................... 21 Scan..................................................................................................................................................... 21 Starting and stopping Scan..........
UNPACKING Carefully unpack the transceiver. We recommend you to identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, please contact your dealer immediately.
STANDARD ACCESSORIES Standard Accessories Antenna*1 QA13V (136-174MHz) Instruction Manual Li-ion Battery Pack (2000mAh) QB-44L Charger QBC-44L AC Adaptor (12V/500mA) QPS-01 Belt Clip BC09 Hand Strap GS01 * Note: For frequency band of antenna, please refer to label indicated in the bottom of the antenna. * Note: Car Charger and QBC-44L Charger should be used together.
BATTERY INFORMATION Charging Operation The battery pack is not charged at the factory; please charge it before use. Charging the battery pack for the first time or after extended storage (more than 2 moths) may not bring the battery pack to its normal operating capacity. The peak operating capacity of the battery will be reached after two or three charge/discharge cycles. The battery pack life is over when its operating time decreases even though it is fully and correctly charged and should be replaced.
BATTERY INFORMATION WARNING: If the battery terminals short circuit, it will generate a lot of heat and possibly a fire. When using or storing the radio (or just the battery), keep keys and other metal objects away from the battery terminal contacts. How to Charge 111 Plug the AC adapter into the AC outlet, and then plug the cable of the AC adapter into the DC jack located on the back of the charger. The indicator lights orange (1s) and then goes out indicating it is ready to charge.
BATTERY INFORMATION NOTE: When charging a power-on transceiver equipped with battery, the indicating lamp will not turn into green to show the fully charged status. Only when the transceiver is switched off, can the lamp indicate normally. The transceiver consumes energy when it is power-on, and the charger can not detect the voltage when the battery has been fully charged. So the charger will charge battery constant voltage and fail to indicate correctly whether the battery has been charged fully.
BATTERY INFORMATION Normal Charging Tips 111 Self- Examination: When charging, orange light twinkles for 1 second and goes out, which means the charger has passed its self-examination and it can charge the battery normally. If the light remains orange or the red light twinkles, it means the charger can not pass its selfexamination or charge the battery.
BATTERY INFORMATION WARNING: ▼▼Do not short circuit battery terminals. ▼▼Never attempt to remove the casing from the battery pack. ▼▼Never assemble the battery in dangerous surroundings, spark may cause explosion. ▼▼Do not put the battery in hot environment or throw it into fire, it may cause explosion.
PREPARATION Installing / Removing the Battery 111 Match the two grooves of the battery pack with the corresponding guides on the back of the transceiver, and then push it. 222 Press the battery pack until the release latch on the top of the transceiver locks. After hearing a “click” sound, the battery has been locked. 333 To remove the battery pack, slide up the release latch and remove the pack away from the transceiver.
PREPARATION Installing / Removing the Belt Clip ■ Installing the Belt Clip: Place the belt clip to the corresponding grooves on the back of the transceiver and secure with the provided screws. Installing the Additional Speaker/ Microphone Open the MIC-SP jack cover and then insert the Speaker/Microphone plug into MIC-SP jack. NOTE: When use the additional speaker/ microphone will influence the waterproof of the transceiver. The user need buy Speaker/Microphone by themselves.
PREPARATION Installing/ Removing the Hand Strap Slide the loop of the hand strap through the eyelet on the upper rear of the transceiver, then pull the entire hand strap through the loop to secure the hand strap in place and lastly tighten the hand strap.
GETTING ACQUAINTED 1 3 2 4 7 6 8 5 11 Professional FM Transceiver
GETTING ACQUAINTED 1 2 3 4 5 6 7 8 Antenna POWER / VOLUME Switch: Turn clockwise to switch on the transceiver, and turn anticlockwise till hearing “click” to switch off the transceiver. After switching on the transceiver, turn clockwise to increase the volume and anticlockwise to decrease the volume. Channel Selector Knob Turn the selector knob to select desired channel. Turn clockwise to increase channel, anticlockwise to decrease channel.
GETTING ACQUAINTED Side key: 111 Unassigned 222 All Alert Tones On/Off 333 High/Low power 444 Monitor 555 One Touch Access 1 666 One Touch Access 2 777 One Touch Access 3 888 One Touch Access 4 999 One Touch Access 5 13 Professional FM Transceiver 1111One Touch Access 6 1111Scan On/Off 1111Tight/ Normal Squelch 1111Privacy On/Off 1111VOX On/Off 1111Zone Toggle 1111Battery Indicator 1111Lone Work On/Off 1111Emergency Call
SUMMARY Power on the radio Power on the radio: Turn on the radio by turning the Power/Volume switch clockwise till a click is heard, and you will hear a Power up beep if the dealer has set it. The radio is now in Rx mode. Adjust Volume Rotate the Power/Volume knob to adjust the volume. Turn clockwise to increase the volume and counterclockwise to decrease the volume. LED Indicator LED indicator shows the transceiver work state. Red LED turns on- Transceiver is transmitting.
FUNCTION INTRODUCTION Receive and make a digital call 1.Selecting a zone A zone is a group of channels. Your radio supports 2 zones, with a maximum of 16 channels per zone, total 32 channels. 111 Press zone key. 222 You can hear a confirmed alert tone, that's mean the radio already switch from zone 1 to zone 2, or you can hear an unconfirmed alert tone, that's means the radio already switch from zone 2 to zone 1. 2.
FUNCTION INTRODUCTION 111 The green LED turns on. 222 Hold the radio vertically 1 to 2 inches ( 2.5 to 5.0cm) from your mouth. If the channel Free Indication feature is enabled, you will hear a short alert tone the moment the transmitting radio releases the [PTT] key, indicating the channel is free for you to respond. 333 Press [PTT] key to respond to the call, the red LED turns on. 444 Wait for the Talk Permit Tone to finish(if enabled) and speak clearly into the Microphone.
FUNCTION INTRODUCTION 6.Receiving an All Call An All Call is a call from an individual radio to every radio on the channel. It is used to make important announcements requiring the user's full attention. When you receive an All Call: 111 A Tone sounds and the Green LED turns on. 222 If there is no voice activity for predetermined period of time, the call ends.
FUNCTION INTRODUCTION 333 444 555 666 Press the [PTT] key to make the call. The Red LED turns on. Wait for the Talk permit Tone to finish ( if enabled) and speak clearly into the microphone. Release the [PTT] key to listen. When the target radio responds, the green LED turns on. If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the target radio releases the [PTT] key, indicating the channel is free for you to respond. Press the [PTT] key to respond.
FUNCTION INTRODUCTION 333 Press the [PTT] key to make the call. The Red LED turns on. 444 Wait for the Talk Permit Tone to finish ( if enabled) and speak clearly into the microphone. USers on the channel can not respond to an All Call. 11.Making a Group or Private Call with the One Touch Call key The one Touch Call feature allows you to make a Group or Private call to a predefined ID easily. You can ONLY have one ID assigned to a One Touch Call key.
FUNCTION INTRODUCTION You can sending the Text Message by key, maximum predefined 50 Text messages. 111 Press the One Touch Call key to send a predefined Text message to a predefined ID. 222 Red LED turns on. 333 If the message is sent, two "click" sounds. If the message is not sent, a low tone sounds. Encryption On/Off Under standby mode, press "Encryption On/Off " key, and it will switch the transceiver to encryption mode. Other transceivers on the same frequency can not understand the call.
FUNCTION INTRODUCTION will be no response (call) from the target radio unless you press the PTT button to initiate the call. Silent w/Voice: Radio transmits an alarm signal and is able to receive an incoming call without any audio until you press PTT button to initiate or response to the call. Turn on/off Emergency mode by " Emergency On/Off " key. Lone Work Turn on/off by " Lone Work On/Off" key, in order to make sure the holder is safety when the radio in lone work mode.
FUNCTION INTRODUCTION There are two ways of initiating scan: ●● Main Channel Scan( Manual): Your radio scans all the channels/groups in your scan list. On entering scan, your radio may depending on the settings, automatically start on the last scanned " active" channel/group or on the channel where scan was initiated. ●● Auto Scan ( Automatic): Your radio automatically starts scanning when you select a channel/group that has Auto Scan enabled. 2.
FUNCTION INTRODUCTION 333 Wait for the Talk Permit Tone to finish ( if enabled) and speak clearly into the microphone. 444 Release [PTT] key to listen. 555 If you do not respond within hang time, the radio returns to scanning other channels/Setting group. Setting 1.Setting the Squelch Level You can adjust your radio's squelch level to filter out unwanted calls with low signal strength or signals with high background noise. Settings: Normal is the default.
FUNCTION INTRODUCTION 3.Turning the Voice Operating Transmission (VOX) Feature On or Off This feature allows you to initiate a hands-free voice activated call on a channel. The radio automatically transmits for a period, whenever the microphone detects voice. Pressing the PTT key during radio operation will disable VOX. To re-enable VOX, do one of the following: Turn the radio off and powering it on again. Or change the channel via the Channel Selector Knob, OR Following the procedure below.
FUNCTION INTRODUCTION 5.Battery Capacity Enquiry You can check battery capacity. Setup: The yellow LED turns on means the battery is in charging, the green LED turns on means battery capacity is full. Press " Battery Indicator" key and check the battery capacity by BEEP alert tone.
TROUBLE SHOOTING GUIDE Problem Corrective Action No power AAA The battery may be depleted. Recharge or replace the battery. BBB The battery may not be installed correctly. Remove the battery and instal it again. Battery power dies shortly after charging. The battery life is finished. replace the battery pack with a new one. No sound after using earphone for a Earphone jack is broken. Please contact local dealers to repair.
TECHNICAL SPECIFICATIONS General Spurious Rejection ≥70dB Frequency Range Digital: 136-174MHz Analog: 136-174MHz Blocking 84db ≥40dB Channel Capacity 32 channels Hum & Noise Channel Spacing 12.5KHz Audio Distortion ≤5% Phase-locked Step Operating Voltage Frequency Stability Operating Temperature Size Weight 5KHz, 6.25KHz 7.4V DC ±20% /(2000mAh) ±2.
