User's Manual

15
7
Shortcut Operations
CTCSS SCAN
Repeatedly press
TX/
DC
S
key until LCD displays
and icons, then hold
TX/DCS
key for 1S
to enter into CTCSS scanning. Once nding
a matching CTCSS signaling, it will stop for
15s then scan again.
Under channel mode, this operation can be temporarily used by user. Once
the radio is turned off or switched to another channel, the temporary setting
will be erased.
When LCD appears
3.
icon, it means
current channe can be set with DCS
encode and decode together, turn
selector knob or press Microphone's [
/ ] to select
desired DCS encode and decode.
CTCSS:62.5-254.1, Total 51groups; DCS:000N-777I total 1024
4.
groups. N is positive code, I is inverse code.
Press any key except
5.
F
U
NC
,
P
W
R
and
TX
/
DC
S
keys to return into
standby status.
Repeatedly press
TX/D
CS
key until LCD displays
DCS icons, then hold
TX/DCS
key for 1S to enter
into DCS scanning. Once nding a matching
DCS signaling, it will stop for 15s then scan
again.
Compander function will decrease the background noise and enhance
audio clarity, especially in long range communication.
Press
1.
F
U
NC
key, then press
SCAN
key to
turn on compander function, repeat
above operation again to turn off
compander function.
Compander (Decrease the background noise and ENHANCE
AUDIO CLARITY)
When LCD appears
2.
icon, enable
compander in current channel.
When LCD doesn't display
3.
icon, disable compander in current
channel.
DCS SCAN