User Manual

23
General Setting
RADIO'S DTMF SELF ID ENQUIRY
Press
1.
key to enter function menu.
Switch the selector knob to choose No. 39
2.
function. The LCD displays "DTMF ID".
Press the Main band selector knob to
3.
enter function setup. The LCD will show
the DTMF self ID.
Press the Main band selector knob or
4.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
Press
1.
key to enter function menu.
Switch the selector knob to choose No.40
2.
function. The LCD displays "5TONE ID".
Press the Main band selector knob to
3.
enter function setup. The LCD will show
the 5TONE self ID.
Press the Main band selector knob or
4.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
5TONE SELF ID ENQUIRY
Press
1.
key to enter function menu.
Turn the Main band selector knob to choose No. 45-47 menu.
2.
The LCD displays "COL RED","COL
GRN","COL BLU".
LCD BACKLIGHT
This function is only valid when both bands work on VFO mode.
NOTE
Enable this function, the adjustment for any band of VFO frequency,
will bring same frequency change to both bands. Adjust one gear, the
frequency for both bands will increase or decrease one step size value.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No.42 menu. The LCD displays
"VFOTR".
VFO FREQUENCY LINKAGE
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to
4.
choose wanted value.Each color (Red,
blue, Green) with 32 brightness levels.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
7
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
Available Values: ON, OFF.
Press the Main band selector knob or
5.
key to store value and back to function menu. Press key
or hold selector knob for over 0.5 second to store setup and exit.