User Manual

21
General Setting
7
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No.28-31 menu. The LCD displays
"PG PA", "PG PB", "PG PC", "PG PD".
Press the Main band selector knob to enter function setup.
3.
4.
Switch the Main band selector knob to choose wanted value.
5.
Press the Main band selector knob or key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
MICROPHONE PA,PB, PC,PD KEY SETUP
For Menu details, please refer to Page 30-31, Microphone Operation.
NOTE
RF SQUELCH LEVEL SETUP
When squelch level function is on, you can cancel squelch only when the
signal strength reach the level setup by users.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No.32 menu. The LCD displays
"RF SQL".
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
S-2: Able to hear the calling when the power meter reach 1 bar.
Switch the Mian band selector knob to choose wanted value.
4.
MANUAL: Auto storage is turn off.
AUTO: Auto storeage is turn on.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to sore setup and exit.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No.34 menu. The LCD displays
"SCAN".
Press the Main band selector knob to enter function setup.
3.
SCAN DWELL TIME SETUP
S-5: Able to hear the calling when the power meter reach 4 bar.
S-9: Able to hear the calling when the power meter reach 8 bar.
S-FULL: Able to hear the calling when the
power meter reach full bar.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No.35 menu. The LCD displays
"SCAN M".
PRIORITY CHANNEL SCAN
Switch the Main band selector knob to choose wanted value.
4.
TIME: it pauses 5s once scanning a matching signal, then resume scan.
BUSY: it pauses once scanning a
matching signal, then resume scan after
the signal disappeared for 2 seconds.
SECEDE: It Stops once scanning a matching signal, and exit scan.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.